Photovoltic Module

Kloben Suncase

MX 60

The KLOBEN SUNCASE MX 60 photovoltaic module is made up of 60 high efficiency multicrystalline silicon solar cells, 156 mm x 156 mm [6.14” x 6.14”] in size. The solar cells are connected electrically in series forming a 6 x 10 array.
Our glass is specifically designed for photovoltaic applications: 4 mm [0.16”] tempered glass to insure mechanical strength even under heavy loads with high light-transmittance; and one treated side to reduce the reflection of incident radiation.
A back-mounted junction box with IP65 level protection and bypass diodes with polarized connectors assure the best protection from hotspot damage. It connects easily to other modules with the special cables supplied.

Photovoltaic Solar Cells	Multi-Crystalline Silicon
Cell dimension	156 mm x 156 mm
Cell quantity	60
Layout	6 x 10
Front glass	High Transmittance
Glass thickness	4 mm
Cell encapsulation	EVA (Ethylene Vinil Acetate)
Back protection	PET Multilayer
Junction box	1 Box IP65 with 3 bypass diodes
Cables and Connectors	Unipolar cable 4 mm². Cables are supplied together with the module as separate components

KLOBEN SUNCASE MX 60	220	230	240
Module Power (--5/+5 Wp) Pmax,Watt	220	230	240
Rated voltage Vmpp, Volt	28.9	29.3	30.3
Rated current Impp, Amp	7.61	7.84	7.93
Open circuit voltage Voc, Volt	36.5	36.8	37.2
Short circuit current Isc, Amp	8.24	8.36	8.53
Maximum system voltage	1000	1000	1000
Module efficiency %	13.1	13.7	14.3
Cell efficiency %	15	15.7	16.4
Surface fuse rating, ADC	15	15	15

Operating temperature range from -40°C to +85°C
Maximum design load: 5400 Pa
Hail impact: diameter of 28mm with impact speed of 86 km/h
Certificates of the product according to the international standards IEC 61215, edition II, EN 61730 -1/ EN 61730-2: 2007
Kloben guarantees the power of the module to be at least 90% of the initial value after 10 years and at least 80% after 25 years.
10 years warranty for manufacturing defects

The specifications are subject to change without notice