Cylinders for Sanitary Water	Combined Tank Series SSP Solar	Cylinder Series Puffer Speicher

Cylinders for Sanitary Water

Vitrified

Cylinder in steel with internal vitrified enamelled coating (according norm DIN 4753 part 3). Supplied with magnesium anode and flange to allow easy inspection. Thermal-insulation in hard asportable polyurethanee, self-extinguishable class B3 (according norm DIN 4102). Outside finishing in grey coloured sky ral 9006, upper and covering shells in hot bored black coloured plastic material.

• Hard polyurethane insulation 50 mm (for tanks 500 l).
• Hard polyurethane insulation 85 mm (for cylinders 750 and 1000 litres), supplied separately

On request available 300 litres cylinder with integrated Low Flow station with return pipe and solar control model EASY. (code 101040101)

INOX AISI 316L

Cylinders in stainless steel INOX AISI 316L, with two tubular heat exchangers. Supplied with magnesium anode, protection tester and inspection flange. Outside finishing in grey coloured sky ral 9006, upper and covering shells in hot bored black coloured plastic material.

• Insulation 85 mm in hard polyurethane supplied separately

Combined Tank Series SSP Solar

The innovative comby tank series SSP SOLAR are manufactured in steel St 37.2, and incorporate a drinkable water coil-storage in stainless steel V4A and a high efficiency solar coil with large exchange surface. The principle of continuous - flowing and the reduced volume of water, guarantee this second storage against the legionnaires infection. On the lower part is installed a stratification tube, that consents a gradual release of the heating water, flowing back from the heating circuit, and allowing an optimal stratification of the different water-temperatures inside the tank. The installation time and the dimensions are reduced, due the many available connections present on both sides of the tank, and thanks to the removable polyurethane insulation (thickness 65 mm for model 500 l and 85 mm for the models from 800 up to 3000 litres).

SSP Solar performance

The performance are measured considering the following conditions (according norm DIN 4708): Net water temperature: 10°C Sanitary water temperature: 45°C Stored water temperature: 65°C

Instantaneous performances

The water output is measured by full tank (water temperature 65°C) and it has been calculated by rates 25 l/min and 40 l/min.

Cylinder Series Puffer Speicher

Cylinder series PUFFER SPEICHER for the storage of hot water, foreseen for the connection to a solar plant. Manufactured in steel, the cylinder are supplied with a large surface solar coil, in order to grant the best performances. On the lower part is installed a stratification tube, that consents a gradual release of the heating water, flowing back from the heating circuit, allowing an optimal stratification of the different water-temperatures inside the tank. Installation time and dimensions are reduced, due the many available connections present on both sides of the tank, and thanks to the removable polyurethane insulation (thickness 65 mm for model 500 l and 85 mm for models 800-1000-1500-2000).